Product Description

40% Bronze filled PTFE Round Bar is the most common metal filler and it is dark brown in color. Bronze filler has excellent wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages between 40 and 60% can increase wear. PTFE Bronze-filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze-Filled is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, superb for linear bearing, slides, guide ways, bearing rings, piston rings and wear pads., etc

Product Detail

40% Bronze filled PTFE Round Bar




Style KXT B980-40

PTFE Bronze Filled is the most common metal filler and it is dark brown in color.  Bronze filler has excellent wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. Adding bronze in percentages between 40 and 60% can increase wear. PTFE Bronze-filled has poor chemical resistance in the presence of acids and alkali. PTFE Bronze-Filled is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speeds rubbing contact points where bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat. Used in hydraulic systems, superb for linear bearing, slides, guide ways, bearing rings, piston rings and wear pads., etc

 

Advantages:

Reduces heat in wear applications (low friction)
Good thermal conductivity
Low moisture absorption

High Tensile strength
Easy machinability

Creap resistance

Excellent wear

 

Application:

Linear bearings

Hydraulic seals
Extrusion rings

Piston Rings

Guide ways

Bearings

Bushings

Wear pads

Slides


Products Categorys

Featured Products

Navigation