Product Description

40% Bronze Powder Filled Teflon PTFE Tube Product number:KXT BU980-40 Quick Overview: The addition of Bronze to PTFE gives better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

Product Detail


40% Bronze Powder Filled Teflon PTFE Tube


Style KXT BU980-40 40% Bronze Powder Filled Teflon PTFE Tube

40% Bronze Powder Filled Teflon PTFE Tube, this bronze powder filler has better wear, creep resistance, and higher thermal conductivity than glass fiber with PTFE. The compound is easily machined, but has poor chemical resistance in the presence of acids and alkali. Bronze powder

filled PTFE is useful in applications which undergo high mechanical loads or high-speed rubbing contacts where the bronze filler supplies the strength and conductivity to carry away excess, unwanted heat

 

Advantages:

The best wear properties of any filled PTFE
Very heavy – high specific gravity
Extremely hard wearing material

Great deformation strengths

Good thermal conductivity

Electrically conductive

 

Application:

Linear bearings

Hydraulic seals
Extrusion rings

Piston Rings

Guide ways

Wear pads

Bushings

Bearings

Sliders

 

Data sheet

Property

Test Method

Values

Specific Gravity

ASTM D 4894

3.2-3.6g/cm3

Tensile Strength

ASTM D 4894

18-25 mpa

Elongation

ASTM D 4894

180-250%

Shore D Hardness

BS EN 13000-2

60-65

Temperature Range

-

-200 oC - 260 oC

Material

-

40% Bronze powder +PTFE



Products Categorys

Featured Products

Navigation