Product Description

The addition of Bronze to Bronze Powder Filled PTFE Tube better dimensional stability and lowers creep, cold flow and wear. It increases hardness and compressive strength whilst also increasing thermal and electrical conductivity

Product Detail

Bronze Powder Filled PTFE Tube


Style KXT BU980 Bronze filled PTFE Tube

PTFE Bronze filled is the most common metal fillers and it is dark brown in color. Bronze filler has excellent wear & creep resistance, and higher thermal conductivity that glass fiber with PTFE. Adding bronze in percentages of weigh between 40 t0 60% can increase wear. PTFE Bronze filled has poor chemical resistance in the presence of acid and alkali. PTFE Bronze Filled is machined and used in bearings at high speeds when shafts are not hardened. It is useful in applications with higher mechanical loads and higher speed rubbing contact points where the bronze-filled supplies the strength and conductivity to carry away excess and unwanted heat 

 

Advantages:

The best wear properties of any filled PTFE
Very heavy – high specific gravity
Extremely hard wearing material

Great deformation strengths

Good thermal conductivity

Electrically conductive

 

Application:

Linear bearings

Hydraulic seals
Extrusion rings

Piston Rings

Guide ways

Wear pads

Bushings

bearings

Slides

 

Data sheet

Specific Gravity

2.9-3.8/cm3

Tensile Strength

10-24 mpa

Elongation

100-260%

Shore D Hardness

65-75

Temperature Range

-200oC - 260 oC

Material

Bronze powder +PTFE

 

Products Categorys

Featured Products

Navigation