Extruded Flexible PTFE Teflon Tube
Product Description
Product Detail
Extruded Flexible PTFE Teflon Tube
Made of polytetrafluoroethylene resin, PTFE flexible tubing has the highest working temperature of any fluoropolymer tubing available today. PTFE is widely used as a pressure tubing in general chemical transfer application such as delivery of natural gas and mineral oils, toxic gas
monitoring; and paint, varnish or adhesive delivery lines. This tubing also serves numerous applications in the automotive, electrical and appliance markets. We careful selection of resin type, particle size, temperature and pressure produces smooth and dimensionally stable tubing
In order to consistently ensure the quality of our products, we only use raw materials from leading manufacturers. We are able to produce PTFE tubes in various dimensions with different material properties according to the customer's need and the corresponding requirements
Advantages
• Highest working temperature (up to +260°C)
• High strength against pressure
• Exceptional heat resistance
• Superior dielectric strength
• Smooth inner surface
• Abrasion resistance
• Non-contaminating
• anti-corrosive
• anti-friction
• Flexible
Application
• Automotive, electrical and appliance markets
• Paint, varnish and adhesive delivery lines
• Natural gas and mineral oil delivery
• High temperature applications
• Electrical Insulation
• Protective Cover
• laboratory., etc
Specification:
|
Diameter |
3mm to 25mm |
|
Wall thickness |
0.7mm to 2mm |
|
Temperature Range |
-250 Deg.C to + 260 Deg.C |
|
Tensile Strength |
2,500-4,000 PSI |
|
Gravity Between |
2.13-2.24 |
Properties
|
Property |
ASTM test |
Value |
|
|---|---|---|---|
|
Physical |
Specific gravity |
D792 |
2.15 |
|
Water absorption ( % ) |
D570 / 24 hrs 1/3" t |
< 0.00 |
|
|
Mold shrinkage ( cm / cm ) |
|
0.02 - 0.05 |
|
|
Contact angle ( degree ) |
Angle to level |
110 |
|
|
Thermal |
Thermal conductivity |
C177 |
6 x 10 - 4 (o /cm ) |
|
thermal expansion Coefficient |
D696 / 23 - 60oC |
10 x 10 - 5 (1/oC) |
|
|
Melting point (oC ) |
|
327 |
|
|
Melt viscosity ( poise ) |
|
1011 - 1013 |
|
|
Melt viscosity ( poise ) |
(340 -380oC) |
||
|
Max continues temperature |
|
260 / 500 (oC/F ) |
|
|
Mechanical |
Tensile strength ( kgf / cm2 ) |
D638 / 23oC |
140 - 350 |
|
Elongation ( % ) |
D638 / 23oC |
200 - 400 |
|
|
Compression strength |
D695 / 1 % deformation, 25oC |
50 - 60( kgf / cm2) |
|
|
Tensile modulus ( kgf / cm2 ) |
D638 / 23oC |
4,000 |
|
|
Flexural modulus ( kgf / cm2 ) |
D790 / 23oC |
5,000 - 6,000 |
|
|
Impact strength ( ft - lb / in ) |
D256 / 23oC, Izod |
3 |
|
|
Hardness (Shore) |
Durometer |
D50 - D65 |
|
|
Deformation under load ( % ) |
D621 / 100oC , 70 kgf / cm2, 24 hrs |
5 |
|
|
|
D621 / 25oC , 140 kgf / cm2, 24 hrs |
7 |
|
|
Static friction coefficient |
Coated - steel surface |
0.02 |
|
|
Electrical |
Dielectric constant |
D150 / 103Hz |
2.1 |
|
D150 / 106 Hz |
2.1 |
||
|
Dielectric dissipation factor |
D150 / 103 Hz |
< 1 x 10 - 5 |
|
|
Dielectric break down strength |
D149 / Short time,1/ 8 in |
480 ( V / mil ) |
|
|
Volume resistivity( ohm - cm ) |
D257 |
> 1018 |
|
|
Chemical resistance |
|
Excellent |
|
|
Weather ability |
|
Excellent |
|
|
Combustibility ( % ) |
D2863 / Oxygen concentration index |
> 95 |
|