Flexible PTFE Teflon Pipe Tubing
Product Description
Product Detail
Flexible PTFE Teflon Pipe Tubing
We manufacture and supply PTFE Tubing and Sleeves from qualitative raw material in cost effective manner so that we can deliver these
tubing in quality standard at reasonable price. PTFE tubing is flexible tubing that is resistant to crimping and blockage. This is the preferred
teflon tubing below 270 oC
Advantages of Tubing:
• Wider Temperature Range: PTFE extruded tubings will work up to 260 oC and shall withstand a peak of 300oC for short durations.
On the lower extreme, PTFE is well known for flexibility even at cryogenic temperatures, say -200 oC
• Superior Electrical Performance: PTFE tubings electrical performance is excellent. The tube posses high degree of concentricity,
a critical parameter in all insulating requirements
• Burst Pressure: Many applications, such as chemical, hydraulic and similar areas, require the tubing to withstand certain minimum
burst pressure. For this reason one can use tubes with lower wall thickness, thus saving on cost. Tubings with SS overbraid are
also available for additional protection
• Abrasion Resistance and Flex: life of PTFE Tubings due to enhance reliability, one can work with lower wall thickness to effect
savings
• Smooth Internals: tubings are perfectly smooth and allow easy insertion of members, especially considering low coefficient of
friction advantage of PTFE
Application
• Automotive, electrical and appliance markets
• Paint, varnish and adhesive delivery lines
• Natural gas and mineral oil delivery
• High temperature applications
• Electrical Insulation
• Protective Cover
• laboratory., etc
Specification:
|
Diameter |
3mm to 25mm |
|
Wall thickness |
0.7mm to 2mm |
|
Temperature Range |
-250 Deg.C to + 260 Deg.C |
|
Tensile Strength |
2,500-4,000 PSI |
|
Gravity Between |
2.13-2.24 |
Properties
|
Property |
ASTM test |
Value |
|
|---|---|---|---|
|
Physical |
Specific gravity |
D792 |
2.15 |
|
Water absorption ( % ) |
D570 / 24 hrs 1/3" t |
< 0.00 |
|
|
Mold shrinkage ( cm / cm ) |
|
0.02 - 0.05 |
|
|
Contact angle ( degree ) |
Angle to level |
110 |
|
|
Thermal |
Thermal conductivity |
C177 |
6 x 10 - 4 (o /cm ) |
|
thermal expansion Coefficient |
D696 / 23 - 60oC |
10 x 10 - 5 (1/oC) |
|
|
Melting point (oC ) |
|
327 |
|
|
Melt viscosity ( poise ) |
|
1011 - 1013 |
|
|
Melt viscosity ( poise ) |
(340 -380oC) |
||
|
Max continues temperature |
|
260 / 500 (oC/F ) |
|
|
Mechanical |
Tensile strength ( kgf / cm2 ) |
D638 / 23oC |
140 - 350 |
|
Elongation ( % ) |
D638 / 23oC |
200 - 400 |
|
|
Compression strength |
D695 / 1 % deformation, 25oC |
50 - 60( kgf / cm2) |
|
|
Tensile modulus ( kgf / cm2 ) |
D638 / 23oC |
4,000 |
|
|
Flexural modulus ( kgf / cm2 ) |
D790 / 23oC |
5,000 - 6,000 |
|
|
Impact strength ( ft - lb / in ) |
D256 / 23oC, Izod |
3 |
|
|
Hardness (Shore) |
Durometer |
D50 - D65 |
|
|
Deformation under load ( % ) |
D621 / 100oC , 70 kgf / cm2, 24 hrs |
5 |
|
|
|
D621 / 25oC , 140 kgf / cm2, 24 hrs |
7 |
|
|
Static friction coefficient |
Coated - steel surface |
0.02 |
|
|
Electrical |
Dielectric constant |
D150 / 103Hz |
2.1 |
|
D150 / 106 Hz |
2.1 |
||
|
Dielectric dissipation factor |
D150 / 103 Hz |
< 1 x 10 - 5 |
|
|
Dielectric break down strength |
D149 / Short time,1/ 8 in |
480 ( V / mil ) |
|
|
Volume resistivity( ohm - cm ) |
D257 |
> 1018 |
|
|
Chemical resistance |
|
Excellent |
|
|
Weather ability |
|
Excellent |
|
|
Combustibility ( % ) |
D2863 / Oxygen concentration index |
> 95 |
|