Product Description

> This type Kammprofile Gasket Basic Style for tongue and groove flanges > Gasket without inner and outer rings > Concentrically grooved profile on both sizes and covered with soft material layers

Product Detail

Kammprofile Gasket Basic Style

Style KXT1110 Kammprofile Gasket Basic Style

Our Kammprofile/Camprofile Gaskets are semi metallic gaskets that can be used for most applications from low to very high pressure. The gaskets consist of a metal core with corrugated grooves and a soft layer of sealing material bonded to either face. The corrugated metal core is a very effective seal in applications where high temperatures, high pressures and fluctuating conditions exist, especially at high seating loads. The sealing layers protect the flange faces from damage and have excellent sealing properties when supported by the corrugated metal core.

Kammprofile gasket basic style

Kammprofile gasket basic style is manufactured without a guide ring for tongue and groove, or recessed flange applications such as Male and Female. It is typically used in heat exchanger applications & applied as an upgrade to double jacketed gaskets especially when lower load is needed. It is highly suggested to have the nubbin (if present) machined out when applying in heat exchanger applications.

Advantages

Outstanding sealing characteristics at a wide range of seating stress levels

The gasket will not damage the flange surface and can be easily removed

High resistance to severe temperature & pressure variation

The gasket cores are reusable reducing cost usage

Extreme temperature and chemical resistance

Low initial sealing stress for installation

Reliable sealing performance

Can be reused

Application

High pressure and high temperature applications

Heat Exchanger and vessel applications

Small flange widths & damaged flange

Suitable for a range of chemicals

Can be used for narrow flanges

Petrochemical industry

Coolers., etc

Materials for metal Core

Core Materials Max Temperature Core Materials Max Temperature Core Thicknes
SS 316L 550 oC Inconel 625 450 oC 2mm, 3mm, 4mm
SS 304 550 oC Incoloy 825 450 oC
Monel 400 600 oC Hastelloy B-2 450 oC
Nickel 200 600 oC Hastelloy C 276 450 oC
Inconel 600 900 oC Titanium 350 oC
Face Materials Max Temp Face Materials Max Temp
Graphite 550 oC PTFE 260 oC

Standard size

Thickness: 3.5mm, 4.0mm, 4.5mm, 5.0mm We also provides other sizes, for details please contact us or send your inquiry directly to us

Products Categorys

Featured Products

Navigation