Product Description

The Kammprofile Gasket with Integral Outer Ring metallic core is made with a concentrically grooved profile on both sides and a machined centering ring. > Gasket with soft sealing layer both sealing surface.

Product Detail

Kammprofile Gasket with Integral Outer Ring

Style KXT1130 Kammprofile Gasket with Integral Outer Ring

Kammprofile gasket have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our Kammprofile gaskets can be found in conventional power plants as well as in the primary circuit of nuclear power plants. In nuclear power plants, they are used e.g. as a heat exchanger gasket, as a valve cap gasket or as a manhole cover gasket on steam generators or pressurisers

Kammprofile Gasket with Integral Outer Ring

Kammprofile Gasket with Integral Outer Ring is a slight variation than Kammprofile Gasket with loose Outer Ring. The integral outer locating ring is replaced by a loose fitting, independent, thinner locating ring. The loose fitting ring allows for expansion and contraction without excessive stress being induced in the solid metal core. Depending on centering ring material and thickness, Kammprofile Gasket with Integral outer ring may be more economical than Kammprofile Gasket with loose Outer Ring. TKammprofile Gasket with Integral Outer Ring is recommended for use on standard flat face and raised face flange assemblies.

Advantages

Outstanding sealing characteristics at a wide range of seating stress levels

The gasket will not damage the flange surface and can be easily removed

High resistance to severe temperature & pressure variation

The gasket cores are reusable reducing cost usage

Extreme temperature and chemical resistance

Low initial sealing stress for installation

Reliable sealing performance

Can be reused

Application

High pressure and high temperature applications

Heat Exchanger and vessel applications

Small flange widths & damaged flange

Suitable for a range of chemicals

Can be used for narrow flanges

Petrochemical industry

Coolers., etc

Materials for metal Core

Core Materials Max Temperature Core Materials Max Temperature Core Thicknes
SS 316L 550 oC Inconel 625 450 oC 2mm, 3mm, 4mm
SS 304 550 oC Incoloy 825 450 oC
Monel 400 600 oC Hastelloy B-2 450 oC
Nickel 200 600 oC Hastelloy C 276 450 oC
Inconel 600 900 oC Titanium 350 oC
Face Materials Max Temp Face Materials Max Temp
Graphite 550 oC PTFE 260 oC

Standard size

Thickness: 3.5mm, 4.0mm, 4.5mm, 5.0mm We also provides other sizes, for details please contact us or send your inquiry directly to us

Products Categorys

Featured Products

Navigation