Product Description

Non-asbestos Rubber Gasket Synthetic Fiber gasket cut from Synthetic Fiber rubber sheet. Suitable for use as an oil-resistant jointing medium for heat installations and engine sealing.

Product Detail

Non-asbestos Rubber Gasket

Style KXT2000 Aramid Fiber with NBR Binder Asbetso Free Rubber Gasket

Non-asbestos gaskets come in a variety of basic materials comprised of carbon, graphite, fiberglass, aramid fiber, Kevlar and other mineral fibers. The basic components of the non-asbestos materials used in gasket construction are elastomer and filler. Add special adhesives and a little packing into it, then roll and sulfurated. The elastomer composition corresponds to the application of the gasket, assisting in the categorization and selection of the gasket best used for the service it will be performing. It is a replacement of asbestos gasket. Non-asbestos Gasket has better strength, elasticity. It has supper strong anti-penetrate performance. Non-asbestos Gasket is a better choice than asbestos gasket in high temperature and high pressure condition. And Non-asbestos Gasket is product using material with environment protection

Advantages

Harmless to human body compare with asbetso rubber gasket

High temperature and pressure resistant

Good resistance to hot oil, fuels

Nice sealability, sealess effect

Excellent bolt torque retention Harmless to human body

Environment protection

Good tensil strength

Application

Used in pipe flange, Steam

Motorcycle engine

Gerneral chemical

Gasoline, gas

Hot water

Oil, fuel

Physical Properties

Thickness - 1.5mm
Density - 1.95g/cm3
Tensill Strength ASTM F152 8 mpa
Compression ASTM F36 > 6%
Recovery ASTM F36 50% min
Residual stress BS 7531 20 mpa
Gas leakage BS 7531 < 1.0 ml/min
ASTM Oil 1 Thickness increase 1.0%
ASTM Oil 3 Thickness increase 4.0%
ASTM Fuel B Thickness increase 4.0%
Working temp. - 180-300 oC

Products Categorys

Featured Products

Navigation